Siemens MC35 Manual de usuario descargar pdf (Pagina 210)

AT Command Set

MC35_ATC_01_V04.00 Page 210 of 238 02.04.2002

8.36 AT^SSDA Set Display Availability

Use the AT^SSDA command to specify whether your MC35 product is designed to provide a display.

If there is one available, AT^SSDA enables or disables the mobile station to present incoming

Class 0 short messages directly on the display. The command is not required for other short mes-

sage Classes.

Test command

AT^SSDA =?

Response

^SSDA: (list of supported <da>s)

Parameter

See write command

Read command

AT^ SSDA?

Response

^SSDA: <da> OK

Parameter

See write command

Write command

AT^SSDA=

<da>

Response

Parameter

<da>: display availability

0 the mobile station is not capable of displaying short messages

1 the mobile station is capable of displaying short messages

Reference

Siemens

Note

If a mobile station is able display short messages, class 0 messages shall be dis-

played immediately. If the mobile station has no display, class 0 messages shall

be treated as though there was no message class.

Refer to GSM 03.38.

The setting of <da> influences the behaviour of the <mt> parameter in the com-

mand AT+CNMI. This is the only effect of this command. If <da> and <mt> equal

1, Class 0 short messages are treated as if <mt> are 2.

Multiplex protocol:

If using <da>=1 and <mt>=1 on one instance, all other instances have to use

<mt>=0.

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 237 238

Sin comentarios

Siemens MC35 Manual de usuario Pagina 210