Siemens GC..M.. Manual de usuario descargar pdf (Pagina 13)

GORATU MAQUINAS HERRAMIENTA,S.A.

GCM 4 / 5 / 6 / 8 / 10 11 JANUARY - 2011

20. STARTING UP AND COMMISSIONING

§ Customer request:

o Machine sitting following GORATU`s foundation instructions.

o Electrical connection following GORATU`s instructions.

o Air connection following GORATU`s instructions.

§ Machine visual inspection, in order to check any damage that may occur during

transport.

§ Check properly power supply and air connections (phase order and pressure).

§ Check properly good performance of machine:

o Movement of all axis.

o Spindle rotation / Orientation.

o Accessories / Auxiliary equipments.

o Gears / Refrigeration

§ Geometrical verification as per UNE standard specified for each type of machine.

§ Operation training:

o 1 Day (8 hours) for basic numerical control operation for standard machine

without options. Training course with following contents:

1. Control panel / CNC.

2. Axis movement / Reference setting.

3. Offsets calculation / work piece reference.

4. Edition / program selection.

5. Tool offset

6. Program transmission (PC – CNC).

o Options:

1. Tool measuring probe. (2 hours).

2. Work piece measuring probe. (3 hours).

3. Digitalising probe. (6 hours).

4. Electronic dividing table. (1 hour).

5. Tool magazine. (1,5 hours).

21. VERIFICATIONS

§ The machine is geometrically verified in accordance with Geometrical verification

standard of GORATU, adaptation of Spanish standard UNE 15-302/90, from ISO 1984-

1982, and compendium of DIN 8615, part 3 and 4 relative to “verification conditions of

fixed bed height milling machine and mandrino in horizontal position and/or mandrino in

vertical”

§ Axis positioning verification is made by laser according to ISO 230-2 standard.

§ POSITIONING ACCURACY (mm)................................................................... A: 0,015 mm

§ REPEATABILITY (mm)....................................................................................R: 0,008 mm

(*) For X>3000 mm traverse, increase 0,005 mm. For each additional 1000 mm.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sin comentarios

Siemens GC..M.. Manual de usuario Pagina 13