Siemens SISTORE AX9 Manual de usuario descargar pdf (Pagina 15)

Installation

2.7 Connecting Audio

NOTE:

It is the user’s responsibility to determine if local laws and regulations permit recording audio.

Fig. 7 Audio In and Out connectors.

Your DVR can record audio. Connect the audio source to Audio In. Connect

Audio Out to your amplifier.

NOTE:

The DVR does not have amplified audio output, so you will need a speaker with an amplifier. The

audio input can be from an amplified source or directly from a microphone.

2.8 Connecting Alarms

Fig. 8 Alarm Input/Output and RS485 connector

Fig. 9 Alarm Input/Output board and alarm connector strips

An Alarm I/O port (DB-25 male connector) is provided to connect the alarm inputs

and alarm outputs. Connect the wires to connectors on the Alarm I/O board

(supplied with the unit), and then connect the board to the Alarm I/O port.

CAUTION Do not attempt to wire directly to the DB-25 male connector.

NOTE:

The Alarm I/O Board consists of alarm connector strips and RS485 connector.

Siemens Building Technologies SISTORE AX9 AX16_EN.doc

Fire & Security Products 09.2004

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 91 92

Sin comentarios

Siemens SISTORE AX9 Manual de usuario Pagina 15