Siemens CCBS1337-MP Manual de instrucciones descargar pdf (Pagina 15)

Installing the

Camera

Siemens Building Technologies

Fire Safety & Security Products 03. 2005

7.2.2 D/N LEVEL

Fig. 2 D/N LEVEL

This function sets the filter switchover point to high, low or medium.

Configure a switchover point from COLOR mode to B/W mode. Move the cursor to

the position shown in Fig. 2. Use the LEFT/ RIGHT button to select HIGH, LOW or

MID. This setting is only relevant if the D/N mode is set to AUTO.

LOW The brightness for switchover from COLOR to B/W mode is approx. 1 lux

MID

The brightness for switchover from COLOR to B/W mode is approx. 2 lux.

HIGH

The brightness for switchover from COLOR to B/W mode is approx. 4 lux.

7.2.3 D/N DELAY

Fig. 3 D/N DELAY

This function sets the DELAY time for the D/ N function

Move the cursor to the position shown in Fig. 3.

Use the LEFT/ RIGHT button to select 0, 5, 10, 15 or 20 sec for delay of DN filter

moving timing. This setting is only relevant if the D/N mode is set to AUTO.

Info:

If using the camera together with infrared illumination, we recommend using video lenses with

special IR coating to prevent a physically based focus-shift between daylight and IR illumination.

We recommend using the D/N mode “MANUAL” when the camera is used with discrete IR

illumination in order to prevent the continual switching between color and B/W mode that might occur

with the D/N mode “AUTO”

D/N MODE AUTO

D/N LEVEL HIGH

D/N DELAY 15 sec

EXPOSURE <ALC>

SHUTTER 1/50

GAIN NORMAL

SYNC LL:000

BLC OFF

NEXT EXIT CANCEL DEFAULT

D/N MODE AUTO

D/N LEVEL HIGH

D/N DELAY 15 sec

EXPOSURE <ALC>

SHUTTER 1/50

GAIN NORMAL

SYNC LL:000

BLC OFF

NEXT EXIT CANCEL DEFAULT

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Comentarios a estos manuales

Sin comentarios

Siemens CCBS1337-MP Manual de instrucciones Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Siemens CCBS1337-MP