c
Type Description / Technical data Order No.
6 ©2006 Siemens Building Technologies — Data subject to change without notice
IP cameras
CCIS1337-LP 1/3” DSP DN, IP camera 540 TV lines, POE, PAL, 12 VDC / 24 VAC 2GF1186-8AB
CCIS1337 is a Super High Resolution day-night camera transmitting
images over ethernet networks via IP. These images can then be
viewed on any PC connected to this network and recorded in full digi-
tal quality via SISTORE MX, which allows streaming IP camera record-
ings. This camera has a mechanical infrared cut filter, providing crisp
aperture corrected, low-smear images 24 hours a day. In night mode
the camera is infrared sensitive and should be used with infrared illumi-
nation and “day-night” lenses to ensure there is no focus shift. Access
to camera settings is via an intuitive HTML page, allowing setup of fea-
tures such as advanced MJPEG compression for optimum picture
quality, 6 zone programmable back-light compensation, camera titles,
alarm functions, security protection menus etc. Additionally, power
over ethernet (POE) is possible, where the power is supplied over the
ethernet calble, therefore an external power supply would not be
required if used in this mode.
Pixels 752 (H) x 582 (V)
Streaming QCIF (176 x 144) 25 ips
CIF (352 x 288) 25 ips
4CIF (704 x 576) 10 ips
Compression MJPEG
Synchronisation Internal oscillator / Line lock / Genlock
Horizontal resolution 540 TV lines
Minimum illumination 0.040 Lux (F1.4) at 50IRE - colour
0.008 Lux (F1.4) at 50IRE - mono
S/N ratio >50 dB
Gain control Switchable (ON / OFF), up to 30 dB
White balance control Manual / auto
Back-light compensation 6 zones
Camera titles 16 characters
Remote setup Ethernet (via HTML)
Lens mount CS (C-mount adaptor supplied)
Auto-iris control Direct drive or video drive
Dimensions (W x H x D) 74 x 60 x 125mm
Power requirements 12 V
DC, 24 VAC, 5 W
Power over Ethernet (POE)
camera mounts & accessories
CAB1420 Universal camera mount 140 mm silver/black 2GF1710-8BD
Siemens silver-coloured stem with black base attractive camera wall
mount to compliment Siemens silver-coloured cameras (CCBx series).
Installation Wall or ceiling
Colour Silver and black
Dimensions (Ø x L) 56 x 140 mm
CAB1920 Universal camera mount 190 mm silver/black 2GF1710-8BE
As CAB1420 for technical details, but 190 mm length.
PSU230-12 Power supply unit for 12 V
DC cameras, 2 pin 2GF1800-8BE
Power supply, intended for 12 V
DC cameras.
Input voltage 220 V
AC
Output voltage 12 VDC / 700 mA
Number of Pins 2
CAPA2410-P230 Power supply unit for 24 V
AC cameras, 2 pin 2GF1800-8BJ
Power supply, intended for 24 V
AC cameras.
Input voltage 230 V
AC
Output voltage 24 VAC / 500 mA
Number of Pins 2
cameras & domes
Comentarios a estos manuales