Siemens SIMATIC IPC427C Instrucciones de operaciones descargar pdf (Pagina 60)

Functions

9.4 HAL tool

SIMATIC IPC427C

60 Operating Instructions, 10/2010, A5E02414743-03

 Remove file

fbwfmgr /removeexclusion

C: \Test.txt

 Remove folder

fbwfmgr /removeexclusion C: \Test

folder

Call up the help function

fbwfmgr /?

For detailed instructions on FBWF go to (http://msdn.microsoft.com/en-

us/library/aa940926(WinEmbedded.5).aspx)

9.4 HAL tool

On a SIMATIC IPC with unicore processor, you can use the HAL tool to change from the

installed Multiprocessor PC HAL to a Uniprocessor PC HAL. The HAL tool is used in

Windows Embedded Standard 2009.

Installation of the HAL tool

1. Unzip the "HAL-Tool.zip" file to a folder.

2. Change to HAL:

● To change to Multiprocessor PC HAL:

Run "HAL_Multiprocessor.bat"

● To change to Uniprocessor PC HAL:

Run "HAL_Uniprocessor.bat"

1. Restart the computer.

2. Once again restart the computer when prompted in Windows.

Restoring the original state in Windows Embedded Standard 2009

1. Boot Windows Embedded Standard 2009.

2. Open the folder: C:\Windows\HAL-Backup\original

3. Run the "undo.bat" batch file.

4. Restart Windows Embedded Standard 2009.

Restoring the original state in Windows PE

1. Boot Windows PE (e.g. from the Restore CD/DVD).

2. Open a console window.

3. Open the following folder: C:\Windows\HAL-Backup\original

4. Run the "undo.bat" batch file.

5. Restart Windows Embedded Standard 2009.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 181 182

Sin comentarios

Siemens SIMATIC IPC427C Instrucciones de operaciones Pagina 60