Siemens SIMATIC PC Adapter TS Adapter Manual de servicio Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 86
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
Connecting
3.2 Power Supply
TS Adapter IE Basic
Manual, 08/2014, A5E02615140-03
21
Wiring the connectors
To change the voltage, proceed as follows:
1. If you want to use ferrules, isolate the wires to 10 mm. Cap the crimp ferrules with the
lines.
Strip about 8 to 10 mm off the wires.
2. Place the cores on (
).
3. Screw the ends of the cores with the voltage, tightening torque: 0.6 to 0.8 Nm (
).
L+
24 V DC
M
Ground
Ground connection
Figure 3-2 Change the voltage
Plug on voltage
place the wired voltage until it locks into the power socket. Ensure the correct plug
orientation.
Voltage
Figure 3-3 Plug voltage on TS Adapter IE Basic.
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 85 86

Comentarios a estos manuales

Sin comentarios