Siemens DataNET Hub (DNH) Manual de usuario descargar pdf (Pagina 69)

2000585-001 Data Communications Setup • 61

Firmware Updates, Continued

6. Click on Send Text File.

The Send Text File dialog box will appear. In the Look in: window

choose the directory on your PC where the DNH files reside. Typi-

cally this would be aai.

7. Under Files of type select All files (*.*).

8. Under File name type in the upgrade version file name (DataNET

hub.hex).

This will start the down loading of the files. Once the download has

begun the block numbers will be displayed as they are transmitted.

The upload will take approximately 45 minutes to complete.

9. Repeat steps 1 through 8 for Hub ‘B’ half.

To configure the Ethernet MAC address after the firmware upade per-

form the following steps:

1. At the Local > prompt type: config address etherenet

xx.xx.xx.xx.xx.xx

where: xx.xx.xx.xx.xx.xx is the MAX address for the DataNET Hub

board. Typically the address would be in the range 00.c0.c9.01.21.00

through 00.c0.c9.01.21.ff.

2. Press ↵ Enter to complete your entry.

MAC Address Con-

figuration

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 96 97

Sin comentarios

Siemens DataNET Hub (DNH) Manual de usuario Pagina 69