Siemens DataNET Hub (DNH) Manual de usuario descargar pdf (Pagina 64)

56 •

••

• Data Communications Setup 2000585-001

Establishing a Connection, Continued

3. At the >

> prompt type: login password and press ↵

↵↵

↵ Enter.

The Connect Screen will appear with the login information and the

local prompt. The local prompt indicates that you are communicating

with the DNH connected directly to the PC.

You are now ready to configure the DNH ‘A’ hub or ‘B’ hub with its own

Network Address. go to page 57.

If your PC is connected to one of the DNH configuration ports you can

connect to any other hub on the same network if you know the IP ad-

dress of the DNH.

1. Open Windows HyperTerminal program on your PC.

2. Press ↵

↵↵

↵ Enter twice, the Command Request dialog box will appear.

3. At the >

> prompt type: login password [IP Address].

Once the password is verified the system responds with the login infor-

mation and displays the remote prompt which includes the IP address of

the connected hub.

Remote Connection

Log On

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 96 97

Sin comentarios

Siemens DataNET Hub (DNH) Manual de usuario Pagina 64