Siemens S7-300F-2 Manual de usuario descargar pdf (Pagina 45)

Industry Automation and Drive Technologies - SCE

TIA Training Document

Page 45 of 65

Module E11

Status: 01/2010 Radio Frequency Identification (RFID) with SIMATIC S7-300F-2PN/DP and

RF180C

Variable Description

multitag MOBY U/D or RF300; maximum number of MDS processed in parallel in the field. Permissible

values: 1

MOBY U: BERO operating mode; aerial field is switched on/off automatically. The command

"Aerial ON/OFF“ is overlaid by the BERO operating mode.

00 hex = Without BEROs; no reader synchronization

01 hex = One or two BEROs;

The BEROs are logically ored. While a BERO is operated, the field is

switched on

02 hex = One or two BEROs.

The 1st BERO switches the field on and the 2nd BERO switches the

field off. If there are 2 BEROs and one field_ON_time is parameterized,

the field is switched off automatically if the 2nd BERO does not switch

within the BERO time.

If no field_ON_time is parameterized, the field remains switched on until

the 2nd BERO is operated.

03 hex = Activate reader synchronization by means of cable connection (refer to

manual for Configuration, Installation and Service for MOBY U)

field_ON_control

MOBY D or RF300: 00 hex (reserved)

MOBY U: time for BERO operating mode (field_ON_control = 02)

00 hex = Time monitoring is switched off. For field switch-off, the 2nd BERO is

needed.

01 hex .. FF hex = 1...255s switch-on time for the Reader field

MOBY D: MDS type

00 hex = I-code 1 (for example, MDS D139)

01 hex = ISO MDS

field_ON_time

RF300: 00 hex (reserved)

reserved Reserved

Notes

Parameter “field_ON_time“ value = 0 for MDS type RF300 ___________________________

Parameter “field_ON_time“ value = 1 for MDS type ISO______________________________

__________________________________________________________________________

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 64 65

Sin comentarios

Siemens S7-300F-2 Manual de usuario Pagina 45