Siemens PVN 875 Series Especificaciones descargar pdf (Pagina 16)

SIMATIC customers have free use of the application tips. These tips are only a general approach to using SIMATIC with various applications. Your

specific application may be different. It is your responsibility to use SIMATIC properly in your applications.

Step 31 – Configure the M875 IP address

Enter the following:

 Product type – SOFTNET Configuration

 Module – SCALANCE M87x/MD74x

 Name of the module – m875demo

 IP address (ext) – your AT&T SIM card IP address. If a Dynamic address was assigned

just enter any address or use the address from the overview screen in step 19 which is

the dynamic address that is temporarily assigned. For our demo 192.168.44.44 subnet

255.255.255.0– not a real address.

 IPaddress (int) - 192.168.10.1 subnet 255.255.255.0 – this is the nework that the PLC will

be connected.

 Press “OK”

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 33 34

Sin comentarios

Siemens PVN 875 Series Especificaciones Pagina 16