Siemens HB24D582 Manual de instrucciones descargar pdf (Pagina 7)

Operating the appliance

In this section, you can read about

■ how to fill the water tank

■ how to switch the appliance on and off

■ what to note after each cooking operation

Filling the water tank

When you open the appliance door, you will see the water tank

on the right-hand side.

Caution!

Use of unsuitable liquids may damage the appliance

■ Only use fresh tap water, softened water or uncarbonated

mineral water.

■ If your tap water is very hard, we recommend that you use

softened water.

■ Do not use distilled water, highly chlorinated tap water

(> 40 mg/l) or other liquids.

You can obtain information about your tap water from your

water supplier. The water hardness can be checked with the

test strips enclosed.

Fill the water tank before each use:

1. Open the appliance door and take out the water tank.

2. Fill the water tank with cold water up to the "max" mark.

3. Close the tank cover until you feel it engage.

4. Slide in the water tank until it engages.

Switching on the appliance

1. Turn the operating mode selector to the required operating

mode.

2. Turn the temperature selector to set the temperature.

A default cooking time appears in the display.

3. Use the @ or A button to set the cooking time.

4. Press the † button.

The appliance heats up.

The

[ symbol lights up until the set temperature has been

reached and each time the temperature rises.

In the

é Steam operating mode, the cooking time does not

start counting down until the heating-up time has finished.

Changing the temperature

You can change the temperature at any time. To do this, turn

the temperature selector.

Pause

Briefly press the

† button to interrupt cooking (pause). The

cooling fan may continue running. Press the

† button to start.

If you open the appliance door during cooking, operation is

interrupted. Close the appliance door and press the

† button

to restart.

If you have switched on the basic setting "Continue after

closing door", restarting is not required (see section: Basic

settings).

Display

If the water tank is empty, a signal sounds and the

¯ symbol

(Fill water tank) appears. Cooking is interrupted.

1. Open the appliance door carefully.

N.B.: Hot steam will escape!

2. Remove the water tank, fill up to the "max" mark and slide the

tank back in.

3. Press the † button.

Switching off the appliance

: Risk of scalding!

Hot steam may escape when the appliance door is opened.

Open the appliance door carefully during or after cooking.

When opening the door, do not lean over it. Ensure that,

depending on the temperature, steam is not visible.

Press and hold the

† button to end cooking.

When the cooking time has elapsed, the cooking operation is

ended automatically. A signal sounds. Press the

0 button to

stop the signal.

To switch off the appliance, turn the operating mode and

temperature selectors back to the

Û position.

The cooling fan may continue to run when you open the

appliance door.

After each use

Emptying the water tank.

1. Open the appliance door carefully.

Hot steam will escape.

2. Remove and clean the water tank.

3. Thoroughly dry the seal in the tank cover and the tank recess

in the appliance.

Caution!

Do not dry the water tank in the hot cooking compartment. This

will damage the water tank.

Drying the cooking compartment

: Risk of scalding!

The water in the evaporator dish may still be hot. Allow it to cool

before wiping.

1. Leave the appliance door ajar until the appliance has cooled

down.

2. Once it has cooled down, wipe out the cooking compartment

and the evaporator dish with the enclosed cleaning sponge

and dry well with a soft cloth.

3. Remove food residues in the cooking compartment as soon

as the appliance has cooled down.

4. Wipe units and handles dry where condensation has formed.

Operating mode Temperature range

Steam 35 - 100 °C

Defrosting 35 - 60 °C

PD[

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comentarios a estos manuales

Sin comentarios

Modèles	Type de document
6YG	Manuel de l'utilisateur Futaba 6YG User Manual, 23 pages
7C 2.4GHz	Manuel de l'utilisateur Futaba 7C 2.4GHz User Manual, 86 pages
7FGH	Manuel de l'utilisateur Futaba 7FGH User Manual, 16 pages
7G Contest 7	Manuel de l'utilisateur Futaba 7G Contest 7 User Manual, 12 pages
7UAF, 7UAP	Manuel de l'utilisateur Futaba 7UAF, 7UAP User Manual, 26 pages
8FG 2.4GHz	Manuel de l'utilisateur Futaba 8FG 2.4GHz User Manual, 123 pages
8FGAS, 8FGHS 2.4GHz	Manuel de l'utilisateur Futaba 8FGAS, 8FGHS 2.4GHz User Manual, 139 pages
8J	Manuel de l'utilisateur Futaba 8J User Manual, 93 pages
8JN	Manuel de l'utilisateur Futaba 8JN User Manual, 16 pages
8SGAP	Manuel de l'utilisateur Futaba 8SGAP User Manual, 38 pages
8SSAP	Manuel de l'utilisateur Futaba 8SSAP User Manual, 44 pages
8SSHP	Manuel de l'utilisateur Futaba 8SSHP User Manual, 36 pages
8UHFS, 8UHPS	Manuel de l'utilisateur Futaba 8UHFS, 8UHPS User Manual [it] , 105 pages
9CPS	Manuel de l'utilisateur Futaba 9CPS User Manual, 109 pages
9VAP	Manuel de l'utilisateur Futaba 9VAP User Manual, 60 pages
9VHP	Manuel de l'utilisateur Futaba 9VHP User Manual, 28 pages
9VHP	Manuel de l'utilisateur Futaba 9VHP User Manual, 32 pages
10C 2.4GHz	Manuel de l'utilisateur Futaba 10C 2.4GHz User Manual, 119 pages
10CG 2.4GHz	Manuel de l'utilisateur Futaba 10CG 2.4GHz User Manual [fr] , 119 pages
10J	Manuel de l'utilisateur Futaba 10J User Manual, 175 pages

Siemens HB24D582 Manual de instrucciones Pagina 7

Comentarios a estos manuales

Futaba 6YF manuels

Futaba 6YF Manuel de l'utilisateur (22 pages)

Table des matières

Plus de produits et de manuels pour Accessoires de communication Futaba

Siemens HB24D582 Manual de instrucciones Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Siemens HB24D582

Futaba 6YF manuels

Futaba 6YF Manuel de l'utilisateur (22 pages)

Table des matières

Plus de produits et de manuels pour Accessoires de communication Futaba