Siemens Advance Network Gateway Manual de usuario descargar pdf (Pagina 52)

46 •• Data Communications Setup 2000591-001

Establishing a Connection, Continued

3. At the >> prompt type: login password and press ↵↵ Enter.

The Connect Screen will appear with the login information and the

local prompt. The local prompt indicates that you are communicating

with the ANG connected directly to the PC.

You are now ready to configure the ANG, go to page 47.

If your PC is connected to one of the ANG configuration ports you can

connect to any other hub on the same network if you know the IP ad-

dress of the ANG.

1. Open Windows HyperTerminal program on your PC.

2. Press ↵↵ Enter twice, the Command Request dialog box will appear.

3. At the >> prompt type: login password [IP Address].

Once the password is verified the system responds with the login infor-

mation and displays the remote prompt which includes the IP address of

the connected ANG.

Remote Connection

Log On

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 94 95

Sin comentarios

Siemens Advance Network Gateway Manual de usuario Pagina 52