Siemens Advance Network Gateway Manual de usuario descargar pdf (Pagina 45)

Establishing a Connection, Continued

How to Log On

The following procedure assumes that the Windows Hyper Terminal

program residing on your PC has been configured, the ANG_EN is

operational and the PC is connected to the ANG_EN.

1. Open Windows Hyper Terminal program on your PC or double click

the shortcut icon to start; See Configuring PC.

2. Press ↵ Enter twice.

The following dialog box appears

3. At the > prompt type: login password and press ↵ Enter.

The Connect Screen will appear with the log in information and the

local prompt. The local prompt indicates that you are communicating

with the ANG_EN connected directly to the PC.

2.0.1

You are now ready to configure the Advance Network Gateway

(ANG_EN) with its own Network Address and ADH Loop and Unit

Number; go to page

33.

2000590-001 Data Communications Setup • 31

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 87 88

Sin comentarios

Siemens Advance Network Gateway Manual de usuario Pagina 45