Siemens SPARC ENTERPRISE M8000 Manual de usuario descargar pdf (Pagina 29)

Information about Software 21

6542632 Memory leak in PCIe module if driver attach

fails.

This bug has been fixed in Solaris 10 8/07.

For Solaris 10 11/06, this has been fixed in

patch 120011-09.

There is no workaround.

6545143 When kcage thread is expanding the kcage

area, if the user stack exists in the expanded

area, its area is demapped and might cause a

ptl_1 panic during the flushw handler

execution.

This bug has been fixed in Solaris 10 5/08. For

Solaris 10 8/07 or earlier, this has been fixed in

patch 127111-08.

There is no workaround.

6545685 If the following message displayed on the OS

console, memory degradation or XSB

deconfiguration may occur in the subsequent

reboot.

Example:

mc-opl: WARNING: mc-opl rewrite

timeout on /LSB0/B0

This bug has been fixed in Solaris 10 5/08.

For Solaris 10 8/07 or earlier, this has been

fixed in patch 127111-08.

[Workaround]

Add the following to /etc/system and then

reboot the domain:

set mc-opl: mc_max_rewrite_loop =

20000

6546188 The system panics when running hotplug

(cfgadm(1M)) and DR operations

(addboard(8) and deleteboard(8)) on the

following cards:

• X4447A-Z, PCI-e Quad-port Gigabit

Ethernet Adapter UTP

• X1027A-Z1, PCI-e Dual 10 Gigabit Ethernet

Fiber XFP Low profile Adapter

This bug has been fixed in Solaris 10 5/08.

For Solaris 10 8/07, this has been fixed in

patch 127741-01.

There is no workaround.

6551356 The system panics when running hotplug

(cfgadm(1M)) to configure a previously

unconfigured card. The message "WARNING:

PCI Expansion ROM is not accessible" will be

seen on the console shortly before the system

panic. The following cards are affected by this

defect:

• X4447A-Z, PCI-e Quad-port Gigabit

Ethernet Adapter UTP

• X1027A-Z1, PCI-e Dual 10 Gigabit Ethernet

Fiber XFP Low profile Adapter

This bug has been fixed in Solaris 10 5/08.

For Solaris 10 8/07, this has been fixed in

patch 127741-01.

[Workaround]

Perform cfgadm -c disconnect to

completely remove the card. After waiting at

least 10 seconds, the card may be configured

back into the domain using the cfgadm -c

configure command.

TABLE 4 Solaris OS Issues and Workarounds (Continued)

CR ID Description Workaround

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 49 50

Comentarios a estos manuales

Sin comentarios

Siemens SPARC ENTERPRISE M8000 Manual de usuario Pagina 29

Comentarios a estos manuales

Relacionado con productos y manuales para Ordenadores Siemens SPARC ENTERPRISE M8000