Siemens HICOM 300 Manual de usuario Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
48
Appendix
Gigaset USB Adapter 300 / multilanguage / A31008-M1066-R101-2x-7619 / appendix.fm / 14.11.2008
Schablone 2004_12_27
The connection qual-
ity is poor or there is
interference.
ì Increase the distance between your
Gigaset USB Adapter 300 and the device causing the
interference.
ì Make sure that the PC on which the Gigaset USB Adapter
300 is installed and the device causing the interference are
connected to the power supply via different sockets.
ì Do not place your PC with the Gigaset USB Adapter 300
near microwave devices or devices with wireless video-
audio transmission, e.g. room monitors such as baby
alarms, or near large metal objects.
ì A wireless network in the neighbourhood may be using the
same channel. Change the radio channel for all the wire-
less devices within your network.
ì Align the antenna at the access point.
ì Choose another place for your PC.
It takes a long time to
set up a connection.
Depending on the environment and the devices, setting up a
connection may take a while.
ì Click Scan on the Site Monitor tab or double-click the net-
work in question.
You cannot establish
a connection to the
access point.
If you cannot establish a connection between your Gigaset USB
Adapter 300 and an access point, try one or more of the follow-
ing:
ì Make sure that the physical connection of the access point
operates reliably.
ì Make sure that the same SSID is used for the Gigaset USB
Adapter 300 and the access point.
ì Check whether the security settings configured for the
Gigaset USB Adapter 300 match those for the access point,
e.g. the same key for WEP encryption.
ì Check whether your access to the access point is blocked by
other security measures, e.g. by a MAC filter or filter for IP
addresses.
ì Make sure that the IP address and the subnet mask are con-
figured correctly on the IP Settings tab.
As a rule, it is necessary to assign dynamic IP addresses
when operating a network in infrastructure mode.
Problem Causes and remedies
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 63 64

Comentarios a estos manuales

Sin comentarios