Siemens CCDS1415-ST Manual de servicio

Fire Safety & Security ProductsSiemens Building Technologies Solaris™ Dome CCDS1415-ST CCDS1415-DN CCDS1415-DNX Configuration Manual

10 Siemens Building Technologies Fire Safety & Security Products 08.2006 4 Technical data 4.1 Dome Electrical Camera types 18x optica

11 Siemens Building Technologies Fire Safety & Security Products 08.2006 Environmental IP 67 Operating temperature -10 to +40 °C (-20°C

12 Siemens Building Technologies Fire Safety & Security Products 08.2006 5 Ordering information Type Part. No. Designation CCDS1415-DNX 2

13 Siemens Building Technologies Fire Safety & Security Products 08.2006 6 Scope of delivery Prior to installation confirm that the followi

14 Siemens Building Technologies Fire Safety & Security Products 08.2006 7 Unit description A complete Solaris™ Dome system consists of a

15 Siemens Building Technologies Fire Safety & Security Products 08.2006 8 Installation of the Dome unit Before commencing use of the Sola

16 Siemens Building Technologies Fire Safety & Security Products 08.2006 8.2 Installation procedure The two-piece mounting bracket and the

17 Siemens Building Technologies Fire Safety & Security Products 08.2006 8.3 Installing the mounting brackets There are several types of b

18 Siemens Building Technologies Fire Safety & Security Products 08.2006 Cable exits 1 Rear of plate 1 M25 electrical conduit threade

19 Siemens Building Technologies Fire Safety & Security Products 08.2006 8.3.3 Parapet mount adapter CCDS1415-BM 1. Fasten the wall mount

Liefermöglichkeiten und technische Änderungen vorbehalten. Data and design subject to change without notice. / Supply subject to availability. © 2006

20 Siemens Building Technologies Fire Safety & Security Products 08.2006 8.3.4 Pendant mount CCDS1415-PM The pendant mount CCDS1415-PM i

21 Siemens Building Technologies Fire Safety & Security Products 08.2006 8.3.5 Pole fixture (using wall mount CCDS1415-WM) The wall mount

22 Siemens Building Technologies Fire Safety & Security Products 08.2006 4. Refit the bezel; tighten the six screws lightly to begin wit

23 Siemens Building Technologies Fire Safety & Security Products 08.2006 6. Lower the complete assembly into place, allowing the Dome to p

24 Siemens Building Technologies Fire Safety & Security Products 08.2006 2. Fix them together using the three screws provided. Pendant W

25 Siemens Building Technologies Fire Safety & Security Products 08.2006 6. Lock the Dome bracket into position by back-tightening the lock

26 Siemens Building Technologies Fire Safety & Security Products 08.2006 1 Compression Clamp 2 Plastic Washer 3 Connector Body 4 Cat

27 Siemens Building Technologies Fire Safety & Security Products 08.2006 2. Pass the RJ45 plug from the rear of the connector body and enga

28 Siemens Building Technologies Fire Safety & Security Products 08.2006 6. Clamp around the cable. Take care not to damage the cable. 7.

29 Siemens Building Technologies Fire Safety & Security Products 08.2006 8.5.2 Disassembly 1. Cut away the cable tie and un-loop the cable

3 Siemens Building Technologies Fire Safety & Security Products 08.2006 Contents 1 Functional description ...

30 Siemens Building Technologies Fire Safety & Security Products 08.2006 8.6 Connecting the Solaris™ Dome 1. Offer the Dome up to the mo

31 Siemens Building Technologies Fire Safety & Security Products 08.2006 9 Installation of the External Termination Unit (XTU) This chapte

32 Siemens Building Technologies Fire Safety & Security Products 08.2006 3. Mount the XTU in the selected position and orientation using a

33 Siemens Building Technologies Fire Safety & Security Products 08.2006 9.3 Connecting the XTU to external equipment Make the necessary c

34 Siemens Building Technologies Fire Safety & Security Products 08.2006 Dome connection cable [REQUIRED] The supplied Dome connection cabl

35 Siemens Building Technologies Fire Safety & Security Products 08.2006 9.4.1 XTU connections - coaxial (C-type) telemetry Fig. 13 Coa

36 Siemens Building Technologies Fire Safety & Security Products 08.2006 9.4.2 XTU connections - RS485 (D-type) telemetry Fig. 14 RS485

37 Siemens Building Technologies Fire Safety & Security Products 08.2006 9.4.3 XTU connections - Photon telemetry Fig. 15 Photon telemet

38 Siemens Building Technologies Fire Safety & Security Products 08.2006 9.5 Wiring guide If you have chosen to use a longer cable than th

39 Siemens Building Technologies Fire Safety & Security Products 08.2006 10 Configuration of the External Termination Unit Once the physic

4 Siemens Building Technologies Fire Safety & Security Products 08.2006 11 Configuration of the Dome unit ...

40 Siemens Building Technologies Fire Safety & Security Products 08.2006 10.2 LCD orientation Depending on how the XTU was mounted, you ma

41 Siemens Building Technologies Fire Safety & Security Products 08.2006 XTU MAIN MENUPROTOCOLINTERFACERECEIVER ADDRESSADVANCED COMMSSPECIA

42 Siemens Building Technologies Fire Safety & Security Products 08.2006 10.4 XTU setup Using the main XTU menu you can configure the XTU

43 Siemens Building Technologies Fire Safety & Security Products 08.2006 11 Configuration of the Dome unit Most of the Solaris™ Dome&apos

44 Siemens Building Technologies Fire Safety & Security Products 08.2006 ALARMS The Solaris™ Dome's XTU is provided with a tamper ala

45 Siemens Building Technologies Fire Safety & Security Products 08.2006 11.1.2 The Camera menu The camera menu provides control of a num

46 Siemens Building Technologies Fire Safety & Security Products 08.2006 CAMERA MENUWHITE BALANCECHROMA RED¹CHROMA BLUE¹BACKLIGHTSPECIALEXP

47 Siemens Building Technologies Fire Safety & Security Products 08.2006 11.1.3 The Presets, Tours and Patterns menu A Preset is a stored,

48 Siemens Building Technologies Fire Safety & Security Products 08.2006 PRESET MENUPRESETSPRESET TOURSPATTERNSINACTIVITY RETURNASSIGN PRES

49 Siemens Building Technologies Fire Safety & Security Products 08.2006 11.1.4 The Privacy Zones menu Privacy zones are areas of the came

5 Siemens Building Technologies Fire Safety & Security Products 08.2006 1 Functional description Breaking away from the commonly available

50 Siemens Building Technologies Fire Safety & Security Products 08.2006 11.1.5 The Soft Limits and Sectors menu Soft limits The Soft Lim

51 Siemens Building Technologies Fire Safety & Security Products 08.2006 11.1.6 The Alarm menu The Alarm menu provides access to settings

52 Siemens Building Technologies Fire Safety & Security Products 08.2006 ALARM MENUTAMPER ALARMALARM 1ALARM 2ALARM 3ALARM 4-7GLOBAL ALARM S

53 Siemens Building Technologies Fire Safety & Security Products 08.2006 11.1.7 The OSD menu The OSD menu is used to set up what informati

54 Siemens Building Technologies Fire Safety & Security Products 08.2006 11.1.8 The Diagnostics menu This menu is intended for use by tec

55 Siemens Building Technologies Fire Safety & Security Products 08.2006 12 Telemetry controller operation and setup This chapter explains

56 Siemens Building Technologies Fire Safety & Security Products 08.2006 12.1.2 Access to the OSD with Bewator controllers To gain access

57 Siemens Building Technologies Fire Safety & Security Products 08.2006 12.2 Advanced camera functions The 6000 series and v3i controller

58 Siemens Building Technologies Fire Safety & Security Products 08.2006 12.3.1 Direct control via CKA48xx/CKA32xx NOTE We recomme

59 Siemens Building Technologies Fire Safety & Security Products 08.2006 Record / Recall Pattern 2 88 Mem / Pos Starts recording or pla

6 Siemens Building Technologies Fire Safety & Security Products 08.2006 2 Safety 2.1 Target readers The instructions in this document are

60 Siemens Building Technologies Fire Safety & Security Products 08.2006 12.4 Use with Bewator controllers The following Bewator (Molynx)

61 Siemens Building Technologies Fire Safety & Security Products 08.2006 Alarms When using Molynx V3 protocol in conjunction with a V3i tele

62 Siemens Building Technologies Fire Safety & Security Products 08.2006 Operation User command Notes Return Preset Sequence Information @3

63 Siemens Building Technologies Fire Safety & Security Products 08.2006 12.5 Use with 3rd party controllers It is possible to configure t

64 Siemens Building Technologies Fire Safety & Security Products 08.2006 Operation User action Notes is not set to KEYBOARD. Recall Preset

65 Siemens Building Technologies Fire Safety & Security Products 08.2006 12.5.3 VCL protocol NOTE RS485 connection; 9600 baud, no par

66 Siemens Building Technologies Fire Safety & Security Products 08.2006 Operation User action Notes Recall Preset [n] [GO TO PRESET] Ra

67 Siemens Building Technologies Fire Safety & Security Products 08.2006 Operation User action Notes Recall Preset [PP ENTER] n [PP ENTER]

68 Siemens Building Technologies Fire Safety & Security Products 08.2006 13 Maintenance This final chapter of the manual covers routine ma

69 Siemens Building Technologies Fire Safety & Security Products 08.2006 NOTE If necessary, refit the dust cap attached to the lanyard

7 Siemens Building Technologies Fire Safety & Security Products 08.2006 Liability claim – Do not connect the device if any parts are missin

70 Siemens Building Technologies Fire Safety & Security Products 08.2006 14 Disposal All electrical and electronic products should be di

Keyword index 71 Siemens Building Technologies Fire Safety & Security Products 08.2006 15 Keyword index A Alarm menu 51 B Bewator controlle

Keyword index 72 Siemens Building Technologies Fire Safety & Security Products 08.2006 O Ordering information 12 OSD menu 53 P Parts of th

Issued by Siemens Building Technologies Fire & Security Products GmbH & Co. oHG D-76181 Karlsruhe www.sbt.siemens.com © 2006 Copyright byS

8 Siemens Building Technologies Fire Safety & Security Products 08.2006 2.3 Meaning of the signal words The severity of a hazard is indic

9 Siemens Building Technologies Fire Safety & Security Products 08.2006 3 Guidelines and standards 3.1 EU directives The product meets the