Siemens SIMATIC NET PROFIBUS Manual de usuario descargar pdf (Pagina 12)

PROFIBUS SpliTConnect

for fieldbus systems to IEC 61158-2

Figure 18: SpliTConnect tap and terminator Figure 19: SpliTConnect coupler

SpliTConnect

for fieldbus systems

is used for configuring field bus

segments according to IEC 61158-2

(e.g. PROFIBUS-PA) with field device

connecting points.

Thanks to the FastConnect connection

system (FastConnect stripping tool,

FC process cable according to

IEC 61158-2) the LAN cable is easy to

assemble.

The FC process cable is stripped

in the same way as for FastConnect

(see page 7).

The SpliTConnect tap enables the

configuration of fieldbus segments

according to IEC 61158-2

(e.g. PROFIBUS-PA) with terminal

connecting points.

Additional grounding of the

SpliTConnect tap can be implemented

by a contacting screw.

The terminals can be connected via

the FC process cable according to

IEC 61158-2 or the SpliTConnect M12

outlet or M12 jack.

The SpliTConnect coupler can be used

to construct a PROFIBUS-PA hub by

cascading SpliTConnect taps.

By replacing the contacting screw with

the SpliTConnect terminator, the SpliT-

Connect tap can be used as a bus ter-

minating element.

Figure 20: SpliTConnect M12 outlet Figure 21: SpliTConnect M12 jack

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Sin comentarios

Siemens SIMATIC NET PROFIBUS Manual de usuario Pagina 12