Siemens SIMATIC NET CP 343-1 Manual de usuario descargar pdf (Pagina 26)

LEDs

CP 343-1 Lean

26 Manual, 10/2012, C79000−G8976−C198−07

LEDs for displaying the operating mode

The different combinations of the LEDs on the front panel indicate the status:

Table 4- 1 LEDs: SF, BF, RUN, STOP

SF(red) BF (red) RUN (green) STOP (yellow) CP operating mode

 Starting up after power "ON"

 Stopped (STOP) with errors

In this state, the CPU or intelligent modules in the

rack remain accessible using PG functions.

Starting up (STOP → RUN)

Running (RUN)

Stopping (RUN → STOP)

Stopped (STOP)

In STOP mode, configuring and performing

diagnostics on the CP remain possible.

- - Duplicate IP address detected

- The CP is configured as a PROFINET IO device;

there is no data exchange with the PROFINET IO

controller.

Running (RUN) with error. Possible causes:

 Event display in conjunction with the MRP

function. The CP diagnostics buffer provides

detailed information.

 Extended port diagnostics reports an error.

Examples:

– Current port setting (transmission medium,

duplex) does not correspond to the

configuration.

– Port interconnection does not correspond to

the configuration.

Loading using the Firmware Loader is active. *

)

Firmware activation after loading using the Firmware

Loader is active. *

)

Firmware was successfully downloaded. *

)

Firmware download aborted. *

)

Module fault / system error

)

Does not apply to loading via the update center in Web diagnostics.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Comentarios a estos manuales

Sin comentarios

Siemens SIMATIC NET CP 343-1 Manual de usuario Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Siemens SIMATIC NET CP 343-1