
SOFTWARE
ADSL Compliance
- ANSI T1.413 Issue 2
- ITU G.992.1 Annex A (G.dmt)
- ITU G.992.1 Annex B (G.dmt) with UR2 compliant
- ITU G.992.2 Annex A (G.lite)
- ITU G.994.1 (G.hs)
- Support dying gasp
- Maximum Rate: 8 Mbps for downstream and 1 Mbps
for upstream
ADSL2 Compliance
- ITU G.992.3 Annex A and Annex B (G.dmt.bis)
- ITU G.992.4 Annex A and Annex B (G.lite.bis)
- Support dying gasp (optional)
- Maximum Rate: 12 Mbps for downstream and 1 Mbps
for upstream
ADSL2+ Compliance
- ITU G.992.5 Annex A and Annex B
- Support dying gasp (optional)
- Maximum Rate: 24 Mbps for downstream and 1 Mbps
for upstream
ATM Features
- Compliant to ATM Forum UNI 3.1 / 4.0 Permanent Virtual
Circuits (PVCs)
- Support up to 8 PVCs for UBR, CBR, VBR-nrt, VBR-rt
with traffc shaping
- RFC2684 LLC Encapsulation and VC Multiplexing over
AAL5
- RFC2364 Point-to-Point Protocol (PPP) over ATM
- RFC2225 Classical IP and ARP over ATM
- RFC2516 PPP over Ethernet: support Relay (Transparent
Forwarding) and Client functions
- Support PPPoE, PPPoA, MER and Bridged mode
OAM F4/F5 End-to-End/Segment Loopback Cells
Bridging Features
- Supports self-learning bridge specifed in IEEE 802.1d
- Transparent Bridging
- Supports up to 256 learning MAC addresses
- Transparent Bridging among 10/100 Mb Ethernet
- Supports IGMP Snooping
- Supports 802.1Q VLAN packet pass-through
Security Features
- PAP (RFC1334), CHAP (RFC1994), and MS-CHAP/
MSCHAP2 for PPP session
- Firewall support IP packets fltering based on IP
address/Port number/Protocol type
- Support DoS (Deny of Services) which detect & protect a
number of attacks (such as SYN/FIN/RST Flood, Smurf,
WinNuke, Echo Scan, Xmas Tree Scan, etc)
Confguration and Management
- User-friendly embedded web confguration interface with
password protection in English or German
- Remote management access control
- Telnet session for local or remote management
- Firmware upgrades through HTTP, TFTP, or FTP
- Confguration fle backup and restore
Hardware
Interface
- One RJ-11 port for PSTN ISDN (C2-010-I) ADSL
connection
- One RJ-45 port for IEEE 802.3/802.3u 10/100 Base-T
auto-sensing and auto-crossover Ethernet connection
Regulatory Approvals and Compliance
- EMC: CE
- Safety: CB, LVD
Power Requirement and Operation Environment
Requirement
- Power Adaptor: Input 230±5 V
AC
; Output 9V
AC
, 1.0A
- Power Consumption: max. 14.5 Watt
- Ambient Temperature: 0 to 40°C (32 to 96°F)
- Relative Humidity: 30% to 85% (non-condensing)
Physical
- Front Panel: 5 leds
Dimensions
- Housing: 140 mm (L) x 115 mm (W) x 30 mm (H)
- Weight: 225 g
Ordering Number
ADSL C2-010 (Annex A): S1621-Z133-A
(EAN Code: 40 255 15 22165 4)
ADSL C2-010-I (Annex B): S1621-Z132-A
(EAN Code: 40 255 15 22228 6)
Bossestasse 9, 06484 Quedlinburg,
Deutschland
Andreas Gerold
Tel.: + 49(0) 3946 - 91 99 90
Fax: + 49(0) 3946 - 91 99 91
Mobil: + 49(0) 171 - 74 262 76
Michael Litvinko
Tel.: + 375 17 259 11 03
Fax: + 375 17 259 11 18
Mobil: + 375 297 600 103
www.sis-group.com
Comentarios a estos manuales