Siemens E-110-I Manual de usuario

Quick Start GuideSIEMENS ADSL C-110ADSL Router• Do never open the housing!• Use only the power supply provided with this device.• Use only the cables

10Step 3b:Configure the PC (TCP/IP settings)for Windows NT41. Click on Start -> Settings -> Control Panel.Double-click on the Network icon. TheN

111)Choose a TCP/IP entry whose name contains Ethernet adapter. Do not choosea TCP/IP entry whose name is PPPoE, VPN or other.2)If there is no TCP/IP

12Step 3c:Configure the PC (TCP/IP settings)for Windows 20001. Click on Start -> Settings -> Control Panel.Double-click on the Network and Dial-

13Step 3d:Configure the PC (TCP/IP settings)for Windows XPThe following instructions assume you are running Windows XP’s default interface. If you are

14Step 3e:Configure the PC (TCP/IP settings)for Mac OS 8.6 and OS 9.x1. From the Apple Menu, point toControl Panels and then click TCP/IP.2. From the

15Step 3f:Configure the PC (TCP/IP settings)for Mac OS X1. From the Apple Menu, select SystemPreferences...2. Click on the Network icon in the Interne

16Step 5:Configure the Internet AccessOnce installation is complete on your PC, you need to configure the Internet access. To accessthe SIEMENS ADSL C

17Once installation is complete on your PC, it is possible to access the SIEMENS ADSL C-110state page, which displays the most important information o

18If the solution proposed in this section does not resolve your problem, contact your networkadministrator or technical support.No LEDs come on when

193. Make sure that the user name and password entered are correct.4. Make a telephone call to ensure that there are no problems on the telephone line

2Before you beginVerify that the following items came with your SIEMENS ADSL C-110 kit:System RequirementsBefore starting the installation of the SIEM

201. Make sure that the connections to the ADSL modem are correct, that the port used (Ethernet or USB) is working correctly and that the modem is on.

21Domain name system. This is not an actual internet protocol, but a system for translatingnode names (for example www.nasa.org) into numerical addres

22PPPoE (RFC2516)PPP over Ethernet. Transmission protocol used for ADSL connections. In Italy, this is usually analternative to PPPoA. In fact, data p

23Step 6:Front panel system messagesLED IndicatorsThe ADSL Bridge modem is equipped with LEDs on the front as described in the table below(from left t

3Step 1:Install the Line FilterStand-alone Line FilterFor each device that shares the phone line as your ADSL account:1. Unplug the device’s cord from

4Step 2a:Connect the SIEMENS ADSL C-110 via Ethernet interface1a. With your computer off, plug the end of the ADSL cable (silver) into the Line port o

5Step 2b - part 1:Connect the SIEMENS ADSL C-110 via USB1a. With your computer off, plug the end of the ADSL cable (silver) into the Line port of your

6Step 2b - part 2:Install the USB driverThe USB driver is only working on the following operating system (OS):Windows 98 SE, Windows ME, Windows 2000

73. After a while the following windwo will apppear. Connect the USB cable to your SIEMENSADSL C-110. The driver will be installed automatically.4. If

85. If the following window appears click on Finish.6. After finishing the installation a new icon is displayed in the Taskbar. 7. Proceed with step 3

9Step 3:Configure the PC (TCP/IP settings)IntroductionIn step 3, you will configure your computer to communicate with the SIEMENS ADSL C-110.To do thi