Siemens KVM s2-0411 Manual de usuario descargar pdf (Pagina 43)

590-595-609A

4 Computer terminal operations

4.1 The Console menu

Each appliance can be configured at the appliance level through the Console menu

interface accessed through the configuration port on the rear of the appliance. All

terminal commands are accessed through a terminal or computer running terminal

emulation software.

4.1.1 Configuring the network using the Console menu

 When you turn on the appliance, the appliance initializes for approximately one

minute. After it completes initialization, press any key on the terminal or on the

computer running the terminal emulation software to access the Console menu

interface. The terminal can be connected at any time, even when the appliance is

already turned on.

 The Console Main menu opens. Type 1 and press Enter

for the Network

Configuration option. The Network Configuration menu opens.

Figure 20: Network configuration menu

 Type 1 and press Enter

to set the network speed. You should set the connection

manually without relying on the auto negotiate feature. After pressing Enter

, you are

returned to the Network Configuration menu.

 Type 2 and press Enter

to specify whether you are using a static or Dynamic Host

Configuration Protocol (DHCP) address.

A static IP address can be used to provide a user-defined IP address, netmask, and

default gateway for the appliance. Use a static IP address for ease of configuration.

DHCP is a protocol that automates the configuration of TCP/IP-enabled computers.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 111 112

Sin comentarios

Siemens KVM s2-0411 Manual de usuario Pagina 43