Siemens EF 711 Series Guía de usuario descargar pdf (Pagina 52)

100

101

Configuring the SCALANCE IWLAN Controller

Configuring the SCALANCE IWLAN Controller for the First Time

SCALANCE WLC711

2-22 C79000-G8976-C260-03, 07/2012, User Guide, V8.11

2. In the left pane, click Routing Protocols. The Static Routes tab is displayed.

3. To add a new route, in the Destination Address box type the destination IP address of a

packet.

To define a default static route for any unknown address not in the routing table, type 0.0.0.0.

4. In the Subnet Mask box, type the appropriate subnet mask to separate the network portion

from the host portion of the IP address (typically 255.255.255.0). To define the default static

route for any unknown address, type 0.0.0.0.

5. In the Gateway box, type the IP address of the adjacent router port or gateway on the same

subnet as the SCALANCE IWLAN Controller to which to forward these packets. This is the IP

address of the next hop between the SCALANCE IWLAN Controller and the packet’s ultimate

destination.

6. Click Add. The new route is added to the list of routes.

7. Select the Override dynamic routes checkbox to give priority over the OSPF learned routes,

including the default route, which the SCALANCE IWLAN Controller uses for routing. This

option is enabled by default.

To remove this priority for static routes, so that routing is controlled dynamically at all times,

clear the Override dynamic routes checkbox.

Note:

If you enable dynamic routing (OSPF), the dynamic routes will normally have priority for outgoing routing. For

internal routing on the SCALANCE IWLAN Controller, the static routes normally have priority.

8. To save your changes, click Save.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 491 492

Comentarios a estos manuales

Sin comentarios

Siemens EF 711 Series Guía de usuario Pagina 52

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Siemens EF 711 Series