Siemens SISTORE MX Manual de usuario descargar pdf (Pagina 46)

Starting and stopping recording

Siemens Building Technologies

Fire Safety & Security Products 01.2008

12 Starting and stopping recording

12.1 Starting and stopping normal recording

Starting and stopping of the recording is carried out either via the menu Action ->

Start/Stop recording or directly by selecting the appropriate button (Start

recording/Stop recording) from the toolbar.

The recording action is identified by REC in the picture of the camera in question. If

cameras are not recording but are nonetheless displayed, this is indicated by

STOP within the picture. When a camera is defined as video sensor (motion

detector), movement is displayed by DET in the picture of the camera in question.

Displaying the camera condition as a symbol or as text must be activated in the

“hardware configuration“ of the “configuration mode“.

NOTE

Please note that pre-alarm images will be saved permanently only after an alarm is triggered. If no

alarm is triggered, then the pre-alarm images will not be saved permanently. An alarm may be

triggered either by an event (e.g. motion detection) or by an operator, for instance when pressing the

alarm button during or after a bank robbery.

Starting and stopping recording via the context menu

Cameras can be switched from live image to record mode using the camera

context menu.

To do so, the user requires Start/Stop authorisation.

1. Open the context menu in the video display area (right mouse-click).

2. Select Start recording in the context menu.

Manual triggering uses the same settings for recording as set for motion recording.

If no motion recording is installed, the camera records for 10 seconds at the max.

frame rate.

Fig. 23 Manually operated recording via context menu

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 135 136

Sin comentarios

Siemens SISTORE MX Manual de usuario Pagina 46