Siemens SISTORE MX Manual de usuario Pagina 4

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 10
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 3
IVM
4
Flexible remote monitoring
In networked applications during an
alarm condition, SISTORE MX can provide
a direct link to the remote viewing soft-
ware, to allow immediate access to the
images over the network, or send SMS
and if required an e-mail. This included
RemoteView software can also perform a
“site-tour” – automatically connecting
and disconnecting to pre-defined remote
sites allowing the operator to simply sit
back and watch the tour on the monitor.
Basic matrix switching
It is possible to have a total of 4 analogue
monitor outputs – these can be used to
switch any of the 32 analogue cameras,
creating a basic 32 x 4 switcher. Monitors
can be programmed to act as alarm mon-
itors and SISTORE MX will automatically
switch cameras upon alarm activation.
Reference image
Benefiting both installers and end users
is the facility to store a “reference image”
of the installed camera – so should it be
moved, maliciously or otherwise, or
simply if it has to be serviced, there is an
exact record of its viewing position.
Various different display options
With the connection of up to 64 cameras
possible, multiple screen display options
are provided to the user to ensure the
optimum viewing conditions.
Motion detection
To optimise hard disk storage, the pixel-
based motion detection system allows
the user to define areas of interest in a
scene and only when motion occurs
inside this area, will the images be
recorded.
Covert camera mode
Any camera can be recorded, but not
displayed depending upon the user level,
so cameras monitoring cash registers
could only be monitored by Managers for
example.
Quick and easy searching
To ensure the fastest method of finding
images, a mask can be defined in the
area of interest, filtering the playback to
only that area and ensuring no time is
wasted watching hours of useless video.
Also, there is the timeline search, show-
ing all recorded images across the cam-
eras, including showing movement
detection, alarm triggers etc. – just drag
the line to the time or date required –
simple. Of course it is also possible to
search according to standard criteria such
as date, time, camera and logbook.
Support of megapixel recording
SISTORE MX supports the recording of
megapixel IP cameras. Megapixel record-
ings contain more information, particu-
larly useful when using the integrated
digital zoom feature.
Interoperable security systems
from Siemens
Utilising SiPass access control software
from Siemens, operators have a clear
overview of their buildings, including
open doors or windows. If either the
access control or intrusion detection sys-
tem trigger an alarm, SISTORE MX auto-
matically starts recording the relevant
camera located in the alarm zone area.
The video images can be replayed as
alarm verification directly in the SiPass
software. Activating and deactivating of
intrusion alarm zones is then also possible
via SiPass software, as well as automati-
cally restricting access control rights dur-
ing an alarm situation.
Comprehensive features
that are simple to operate
Various different display options
Up to 32 analogue cameras can be con-
nected to the system; these can be a
mixture of colour or mono, indoor or
outdoor cameras, pan/tilt/zoom cameras,
fixed cameras or speed dome cameras.
IVM (Interactive Video Software) for
integrated control of video systems. This
management system allows the operator
to control a security system via the
graphical user interface.
Vista de pagina 3
1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios